go = the bootloader jumps to the entry point address defined by the go parameter.stop = the bootloader stops at the shell prompt.gateway : Default IPv4 address of the gateway.netmask : Default IPv4 Network netmask.ip : Default IPv4 address of the board.Brief description of the Bootloader parameters:.To understand its syntax, enter the set command without parameters: BOOT> set To change the default parameters the set command should be used.Script : dhcpc erase all tftpc set boot go save go
Enter the get command to see the parameter values: get Enter the ? command to display a list of all commands available within the shell of the Bootloader: BOOT> ? The Bootloader is now ready to accept user commands.Look at the network interface parameters using the info shell command: BOOT> info.Application parameters loaded from Flash. Reset the board, press the RESET button on the board.You may update or backup the firmware with help of TFTP firmware client or TFTP firmware server. Now the TFTP Bootloader is ready to be used.Open the project: fnet\fnet_demos\boards\\boot\\.The fnet_firmware.srec file should appear in directory with binaries.Ĭopy this S-record file to the TFTP Server Base Directory (by default, it is C:\TFTP-Root).Open the project: fnet\fnet_demos\boards\\shell_boot\\.Prepare the example-application image file that is to be downloaded by the TFTP Bootloader:
0 kommentar(er)
